Loctite Resinol 90C equivalent Vacuum Impregnation Sealant
This product is recommended for salvage type impregnation use and for low- to medium-volume production impregnating. Luoke ® Resinol 90C is intended for any impregnation service where simplicity and ease of maintenance are priorities, and where the impregnation system is to be used occasionally or intermittently. Luoke ® Resinol 90C is excellent for replacing older impregnating products in existing process equipment without extensive equipment modifications. Luoke ® Resinol 90C impregnation was specifically developed to be the simplest, lowest maintenance, most trouble-free impregnation process available.
Typical Application: aluminum castings vacuum impregnation
TECHINAL DATA:
UNCURED PROPERTIES
Item No. | LK90C |
Chemical Composition | Methacrylate monomers |
Appearance | Clear Liquid |
Specific Gravity | 1.0 |
Viscosity @25ºC | 5~10cPs |
Flash Point | >93.3ºC |
P.S.: LK90C usually sperated to resin and catalyst(white powder) for storage to get longer shelf life, data here is just for resin.
CURED PROPERTIES
Appearance | Hard clear polymer |
Hardness Shore D (ISO868) | 76 |
Temperature Range ºC | -50~+200 |